Quick Search:    advanced search

GSW Home   GeoRef Home   My GSW Alerts   Contact GSW   About GSW   Journals List   Help

This Article Figures Only Full Text Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Similar articles in Web of Science Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via Web of Science (3) Citing Articles via Google Scholar Google Scholar Articles by Unger, A. J. A. Articles by Simmons, A. M. Search for Related Content GeoRef GeoRef Citation

Simulating Infiltration Tests in Fractured Basalt at the Box Canyon Site, Idaho

^a Univ. of Waterloo, Earth Sciences Department, 200 University Ave. West, Waterloo, ON, Canada N2L 3G1
^b Earth Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720
^c Earth and Environmental Sciences Division, Los Alamos National Laboratory, Los Alamos, NM 87545

Correspondence: ^* Corresponding author (aunger{at}scimail.uwaterloo.ca).

Received for publication 3 February 2003. The results of a series of ponded infiltration tests in variably saturated fractured basalt at Box Canyon, Idaho were used to build confidence in conceptual and numerical modeling approaches used to simulate infiltration in fractured rock. Specifically, we constructed a dual-permeability model using TOUGH2 to represent both the matrix and fracture continua of the upper basalt flow at the Box Canyon Site. A consistent set of hydrogeological parameters was obtained by calibrating the model to infiltration front arrival times in the fracture continuum as inferred from Br^– samples collected from fracture–borehole intersections observed during the infiltrating tests. These parameters included the permeability of the fracture and matrix continua, the interfacial area between the fracture and matrix continua, and the porosity of the fracture continuum. To calibrate the model, we multiplied the fracture–matrix interfacial area by a factor between 0.1 and 0.01 to reduce imbibition of water from the fracture continuum into the matrix continuum during the infiltration tests. Furthermore, the porosity of the fracture continuum, as calculated using the fracture aperture inferred from pneumatic-test permeabilities, was increased by a factor of 50 yielding porosity values for the upper basalt flow in the range of 0.01 to 0.02. The fracture-continuum porosity was a highly sensitive parameter controlling the arrival times of the simulated infiltration fronts. Porosity values are consistent with those determined during the Large-Scale Aquifer Pumping and Infiltration Test at the Idaho National Engineering and Environmental Laboratory.

Abbreviations: ER, electrical resistivity • INEEL, Idaho National Engineering and Environmental Laboratory • LPIT, Large-Scale Aquifer Pumping and Infiltration Test • RMS, root mean square • RWMC, Radioactive Waste Management Complex • SDA, Subsurface Disposal Area • TDR, time domain reflectometry • 1-D, one-dimensional • 3-D, three-dimensional

This article has been cited by other articles:

				M. P. Lamb and W. E. Dietrich The persistence of waterfalls in fractured rock Geological Society of America Bulletin, June 1, 2009; 121(7-8): 1123 - 1134. [Abstract] [Full Text] [PDF]